Burner Controls

D-GF150
Self-monitoring and fail-safe burner control for the control of gas and oil burners as well as combined gas/oil burners of any capacity.

 

D-GF 150-MB
Self-monitoring and fail-safe burner control with integrated Display and Modbus communication for the control of gas and oil burners as well as combined gas/oil burners of any capacity.

 

D-AM 150
Extension module for the D-GF 150 automatic firing device with functions ranging from first out annunciator to plain text display up to fieldbus communication.

 

D-GF 75/ ASD-75 Burner Control
Self-monitoring and fail-safe burner control for the control of gas and oil burners as well as combined gas/oil burners of any capacity.

 

Flame Sensors

Flame sensor (flame scanner) for the monitoring of gas and oil flames, primarily in gas turbines or in particularly harsh environments.

 

D-LE 603
Flame sensor for the monitoring of gas, oil and coal flames, primarily in multi-burner furnces.

 

D-LE 703
Flame sensor with fibre-optic system.

 

D-LE 701
Flame sensor with fibre-optic system.

 

D-LL 7xx
Fibre-optic systems for DURAG flame sensors and flame monitors.

 

D-GT 800
Flame sensor for the monitoring of gas and oil flames, primarily in gas turbines or in particularly harsh environments.

 

D-LE 103
Flame sensors for the monitoring of gas, oil and coal flames, primarily in single burner furnaces.

 

Flame Monitors

D-LX 200
Self-monitoring and fail-safe compact flame monitor for the monitoring of gas, oil, and coal flames with integrated UV or IR flame sensor.

 

D-LX 720
Compact flame monitor with fibre optic system.

 

D-LX 100
Self-monitoring and fail-safe compact flame monitor for the monitoring of gas, oil and coal flames with integrated UV, VIS or IR flame sensor, primarily in single burner furnaces.

 

D-LX 700
Compact flame monitor with fibre optic system.

 

Control Units

D-UG 120
Self-monitoring and fail-safe control unit for the monitoring of gas, oil and coal flames with DURAG UV, UV+IR or IR flame sensors, primarily in single burner furnaces.

 

D-UG 660
Self-monitoring and fail-safe control unit for the monitoring of gas, oil and coal flames with DURAG UV, UV+IR or IR- flame sensors, primarily in multiple-burner furnaces.

 

D-IO 55
The D-IO 55 is no longer in service. It has been replaced by the AAL 75.

 

AAL 75
Particularly cost-effective, fail-safe flame monitors for the monitoring of gas and oil burners as well as combined gas/oil burners.

 

D-IR 55
Particularly cost-effective, fail-safe flame monitors for the monitoring of gas and oil burners as well as combined gas/oil burners.

 

D-UV 55
Particularly cost-effective, fail-safe flame monitors for the monitoring of gas and oil burners as well as combined gas/oil burners.

 

A 240 K 3
For intermittent or continuous operation, with volt-free relay contact for integration into the main burner management system.

 

Flame Relay A 285 K 2.3
This flame relay is a piece of equipment that needs to be integrated into a higher ranking burner control system. It must be only be operated with a Hegwein flame monitor.

 

AAC 75 Flame monitor with flame signal converter
Particularly cost-effective, fail-safe flame monitor with flame signal converter for the monitoring of gas and oil burners as well as gas and oil fired igniters.